+86-15817275200
Company News&Blog
Your current location:Home - Blog&News - Company News&Blog
Stacking height, tolerance accumulation, and pin retention form one mechanical loop. Stacking height sets how far the contacts engage and how the housing and seal land. Tolerance accumulation decides whether that height is repeatable across both boards and the soldering process. Pin retention and housing support decide whether the mated pair stays stable under insertion force, vibration, and side load. Reviewing them together is more useful than approving a connector from an electrical table alone. Readers comparing board-to-board options can use the published s445 data as a starting point, then request the mechanical drawing and review the stack as a complete assembly before layout.
A: Stacking height sets the final distance between the two PCBs, which controls contact engagement, housing clearance, and seal compression. If the stack is taller than intended, contacts may not wipe far enough; if it is shorter, the housing or contacts may over-travel. The nominal height and its tolerance window need to be reviewed together with board thickness and solder height.
A: PCB warpage and uneven solder height tilt the mating face, while placement tolerance shifts the connector in X and Y. Both errors reduce the available alignment margin. When two boards are assembled, those errors add together. A shared datum, post-reflow flatness review, and realistic placement capability check keep the connector from binding during mating.
A: A released drawing should define the mating height with tolerance, pin pitch, contact engagement or wipe, coplanarity, placement datum, housing standoff, contact anchor depth, solder method, and the board thickness assumed in the stack. Seal compression and housing clearance belong there too. These values turn the connector from a catalog item into a measurable part of the PCB assembly.
PCBA connector 32pins board to board waterproof connector with 40A power supply
Prev: Why Pin Retention and Housing Support Matter After Mating
Next: No data